Use axes or chainsaws to fell trees using knowledge of tree characteristics and cutting techniques to control direction of fall and minimize tree damage.
Stop saw engines, pull cutting bars from cuts, and run to safety as tree falls.
Appraise trees for certain characteristics, such as twist, rot, and heavy limb growth, and gauge amount and direction of lean, to determine how to control the direction of a tree's fall with the least damage.
Saw back-cuts, leaving sufficient sound wood to control direction of fall.
Clear brush from work areas and escape routes, and cut saplings and other trees from direction of falls, using axes, chainsaws, or bulldozers.
Measure felled trees and cut them into specified log lengths, using chain saws and axes.
Assess logs after cutting to ensure that the quality and length are correct.
Determine position, direction, and depth of cuts to be made, and placement of wedges or jacks.
Control the direction of a tree's fall by scoring cutting lines with axes, sawing undercuts along scored lines with chainsaws, knocking slabs from cuts with single-bit axes, and driving wedges.
Trim off the tops and limbs of trees, using chainsaws, delimbers, or axes.
Select trees to be cut down, assessing factors such as site, terrain, and weather conditions before beginning work.
Maintain and repair chainsaws and other equipment, cleaning, oiling, and greasing equipment, and sharpening equipment properly.
Insert jacks or drive wedges behind saws to prevent binding of saws and to start trees falling.
Tag unsafe trees with high-visibility ribbons.
Secure steel cables or chains to logs for dragging by tractors or for pulling by cable yarding systems.
Load logs or wood onto trucks, trailers, or railroad cars, by hand or using loaders or winches.
Mark logs for identification.
Work as a member of a team, rotating between chain saw operation and skidder operation.
Place supporting limbs or poles under felled trees to avoid splitting undersides, and to prevent logs from rolling.
Split logs, using axes, wedges, and mauls, and stack wood in ricks or cord lots.
Work Context
Work Context information for this career will be available soon.
Work Activities
Performing General Physical Activities — Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials.
Controlling Machines and Processes — Using either control mechanisms or direct physical activity to operate machines or processes (not including computers or vehicles).
Handling and Moving Objects — Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things.
Identifying Objects, Actions, and Events — Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events.
Operating Vehicles, Mechanized Devices, or Equipment — Running, maneuvering, navigating, or driving vehicles or mechanized equipment, such as forklifts, passenger vehicles, aircraft, or water craft.
Monitor Processes, Materials, or Surroundings — Monitoring and reviewing information from materials, events, or the environment, to detect or assess problems.
Inspecting Equipment, Structures, or Material — Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects.
Repairing and Maintaining Mechanical Equipment — Servicing, repairing, adjusting, and testing machines, devices, moving parts, and equipment that operate primarily on the basis of mechanical (not electronic) principles.
Getting Information — Observing, receiving, and otherwise obtaining information from all relevant sources.
Judging the Qualities of Things, Services, or People — Assessing the value, importance, or quality of things or people.
Establishing and Maintaining Interpersonal Relationships — Developing constructive and cooperative working relationships with others, and maintaining them over time.
The ability to quickly respond (with the hand, finger, or foot) to a signal (sound, light, picture) when it appears.
Multilimb Coordination
The ability to coordinate two or more limbs (for example, two arms, two legs, or one leg and one arm) while sitting, standing, or lying down. It does not involve performing the activities while the whole body is in motion.
Control Precision
The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions.
Manual Dexterity
The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
Arm-Hand Steadiness
The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
Speed of Limb Movement
The ability to quickly move the arms and legs.
Static Strength
The ability to exert maximum muscle force to lift, push, pull, or carry objects.
Trunk Strength
The ability to use your abdominal and lower back muscles to support part of the body repeatedly or continuously over time without 'giving out' or fatiguing.
Stamina
The ability to exert yourself physically over long periods of time without getting winded or out of breath.
Gross Body Coordination
The ability to coordinate the movement of your arms, legs, and torso together when the whole body is in motion.
Near Vision
The ability to see details at close range (within a few feet of the observer).
Depth Perception
The ability to judge which of several objects is closer or farther away from you, or to judge the distance between you and an object.
Auditory Attention
The ability to focus on a single source of sound in the presence of other distracting sounds.
Hearing Sensitivity
The ability to detect or tell the differences between sounds that vary in pitch and loudness.
Visual Color Discrimination
The ability to match or detect differences between colors, including shades of color and brightness.
Far Vision
The ability to see details at a distance.
Flexibility of Closure
The ability to identify or detect a known pattern (a figure, object, word, or sound) that is hidden in other distracting material.
Extent Flexibility
The ability to bend, stretch, twist, or reach with your body, arms, and/or legs.
Rate Control
The ability to time your movements or the movement of a piece of equipment in anticipation of changes in the speed and/or direction of a moving object or scene.
Problem Sensitivity
The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
Information Ordering
The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
Visualization
The ability to imagine how something will look after it is moved around or when its parts are moved or rearranged.
Response Orientation
The ability to choose quickly between two or more movements in response to two or more different signals (lights, sounds, pictures). It includes the speed with which the correct response is started with the hand, foot, or other body part.
Category Flexibility
The ability to generate or use different sets of rules for combining or grouping things in different ways.
Gross Body Equilibrium
The ability to keep or regain your body balance or stay upright when in an unstable position.
Dynamic Strength
The ability to exert muscle force repeatedly or continuously over time. This involves muscular endurance and resistance to muscle fatigue.
Perceptual Speed
The ability to quickly and accurately compare similarities and differences among sets of letters, numbers, objects, pictures, or patterns. The things to be compared may be presented at the same time or one after the other. This ability also includes comparing a presented object with a remembered object.
Oral Expression
The ability to communicate information and ideas in speaking so others will understand.
Oral Comprehension
The ability to listen to and understand information and ideas presented through spoken words and sentences.